Blog

Hot Water Preservation Tips

Posted by on Jul 28, 2016 in Plumbing Repair Corona CA, Water Heating Savings | 0 comments

The majority of locations in the Untied States that property owners reside do not have water scarcities and water use is not limited. Regardless of this, it is a smart choice for people to recognize that conserving water is a responsible point to do, whether or not water is not restricted in ones city. Water conservation is simple and enjoyable for the family members as well. If your kids are at all like mine, they are in fact the water and energy monitors in my house, seeing to it all the adults remember to switch off the lights, and make use of less water. Particularly with using hot water minimized, ones water heater will certainly save property owners on gas or electrical with operating it also!

Where to Decrease Corona Hot Water Usage in the House

To begin with, just being aware of the amount of water one utilizes is a simple way to originally reduce on the total quantity of hot water utilized in the house. Attempt to and minimize the length of time of showers, and the quantity of water made use of in bathtubs. Relying on the number of individuals living in the house, this quantity could accumulate fast. Typically, a fast bath with usage less water compared to a bath.

Next consider using less hot water and even more cold water when making use of the cloth washer. With the types of laundry detergents on the marketplace now, a lot of have the ability to clean clothing just as clean in cold water.

With cleaning dishes, naturally, if one is fortunate sufficient to have actually a dish washing machine installed, one can still utilize it, yet bear in mind only utilizing it if it is complete. Also, try not to load it with huge bowls or pots that could quickly be cleaned by hand.Water Heater Blankets

As for insulation, there always seems to be space for enhancement. One can purchase and put on a water heater covering for the water storage tank. If one has a tankless hot water heater, you are not able to do this. DIY stores sell them and they are simple for people to put on themselves. Make sure to know the gallon quantity of your hot water heater before going to purchase one. Another location to insulate are the hot water pipes heading out of the water heater. This is extremely important when the water heater lies in an unheated part of the home, like a garage. Insulation foam sleeves are easy to include and tape to the hot water pipes.

It should seem evident, however make sure all plumbing leaks are fixed as soon as feasible. Any and all leakages should be fixed, be it a tap, toilet, hose, or any one of the water utilizing home appliances. The price of water alone will certainly build up fast!

There are various thoughts on what the optimal water heater temperature level setup is. Commonly, the factory predetermined can be 120 degrees or higher. For a lot of all property owners, this setting is plenty high. The Department of Energy says that for each ten degrees the water heater is minimized, a 3 – 5 percent in water heating cost savings can be accomplished. There are some possible wellness risks of too reduced of a temperature setting, yet one can be burned if the water is too warm as well.

Faucet aerators and reduced flow shower heads are excellent at aiding conserve water around the home. Both of these residents could conveniently install themselves and do not cost much cash. Surprisingly, faucet aerators were created in order to help protect against water from splashing in a sink . It does do a great task of that, yet it was understood that they lowered the overall quantity of water used, for it puts air right into the water stream. Many plumbing faucets are pre-threaded, so an aerator can be added to them. One can feel around the rim of all faucets to see if that holds true. There are different models depending upon if it is for a bathroom or kitchen sink, and exactly how one wishes to utilize them.

Older aerators can be removed and cleaned up, or changed if they are wearing out. Occasionally taking them off and rinsing or cleaning them off is a smart idea. The screens on older ones can wear out in time. However, once more, they are not costly to acquire. One could require a wrench to unscrew on older one if it is also tight to unscrew manually.

When it comes to, reduced flow shower heads, more recent ones could lowered water flow rates without lowering water pressure. In fact, many new ones take advantage of air chambers or jet streams to quickly blend air with the water flow. The streams and chambers permit the shower heads to make use of significantly less water, as well as boost water pressure for that unwinding massage therapy feeling.

It is not inconceivable that by utilizing low flow shower heads and faucet aerators could have even as much as a 50 percent water savings.

Lastly, whenever it is time to upgrade any water making use of home appliance at home, and naturally the water heater itself, make sure to obtain on that is as power efficient as one can afford. It will certainly pay one back in the long run by enabling one to save money on energy costs of heating water to be used.

We believe in more than fixing hot water heaters in Corona. It is very important to us to be certain all our customers are knowledgeable on all their house plumbing maintenance and use. Do not hesitate to call us with any questions you could have.

Fast Water Heater Maintenance Tasks

Posted by on Jan 26, 2016 in Gas Water Heater Repair Corona CA, Water Heater Repair Corona CA, Water Heater Safety | 0 comments

Let’s talk about doing some water heater maintenance today? It will not likely take long. . .actually we were thinking about 10 minutes. You bet, that could be as long as it will take to discuss 2 maintenance chores that any property owner can complete. The best part is they may help Corona property owners with the following:Corona Water Heater Maintenance Steps

Making sure ones water heater runs for a long time, saving expenses.
Making sure ones water heater operates safely.
By ensuring it works as energy efficiently as possible, at the same time conserving money.

So with that in mind, let us educate you on how to invest 10 minutes once or two times a year to help prevent any water heater repairs for your Corona water heater.

T&P Valve Tests

The task of the temperature and pressure relief valve, also known as the T&P Valve, is extremely critical. It has the critical job of making certain excessive pressure won’t establish on the inside of the water storage tank, which guarantees the water heater doesn’t blow up. The infographic following shows the following steps in evaluating it. The lever must be raised a little and then release it. It should snap back to its shut position immediately. When it is functioning appropriately, some water is often heard going in the drain pipe below the handle that was previously lifted and the noise of a little pressure being released might be heard. One will require a new valve if non-e of these items take place during the test.

Flushing Some of the Water from the Water Heater

WIth time, rust and corrosion will happen on the inside of the water storage tank as a result of the chemical reactions going on with the components that are necessary to create heated water. We are not planning to go into the complex chemical particulars in this article, but by just draining some of the water, it helps eliminate the sediment, and offer a chance to view simply how much sediment is in the water heater.

To do a tiny flush, locate a pail underneath the drain valve, positioned at the bottom part of the tank, and open the drain valve. Just drain a couple gallons of water – a couple pails full. Enable the water to sit in the last pail for a few minutes. As soon as it settles, analyze to see how much stuff has settled to the lower part of the pail. If there is, if the water heater has actually not been drained for a long time (or ever), it would be best to do a complete flush of the tank to get as much of the sediment out as possible.

Have a look at precisely how clean the water looks. When it does not seem too cloudy just performing the mini flush will be okay. If there is a whole lot of gunk in the water a whole flush needs to be carried out. If you already know it has not been flushed for many years, if ever, it will be a good suggestion to drain all of it.

We will not be going straight into all the techniques right here to do so, nevertheless for educational purposes, initially reduce the temperature. Wait at a minimum one hour to permit the water to cool down prior to draining it. Rather than using the buckets, it truly is easier to connect a garden hose to the drain valve and drain the water outside.

If one begins to be aware of unusual cracking noises from the water storage tank, it is actually an indication that there may be a substantial amount of sediment building up inside. This also significantly reduces the energy efficiency of the water heater.

Water heaters will function quite nicely without having a whole lot of maintenance, and many people usually do not execute any sort of maintenance to them. However, to gain the 3 advantages outlined at the start of the post, it is crucial to at least accomplish these two responsibilities. If you have any queries or feel as if you would like some help the first time, contact us! We are always here to aid and to help hinder an unnecessary Corona Water Heater Repair.

Water Heater Repair Corona California

From Visually.

Four Signs of a Water Heater Failure

Posted by on Dec 23, 2015 in Gas Water Heater Repair Corona CA, Water Heater Repair Corona CA | 0 comments

Hot water heaters usually complete exactly what they are intended to and often go undetected until one needs a Corona Water Heater Repair. But, some of the problems which come up can be prevented by having regular servicing by a pro. Make sure to pay attention to your natural gas burning water heater, because a few of the issues that could develop could be pricey and unsafe for friends and family and pets. Here, we are explaining four indications that your gas water heater may possibly need to be replaced.

Dripping WaterWater Heater Repairs Corona CA

In cases where there is water on the ground close to your water heater or leaking out of a pipe, you might have to upgrade the hot water heater. However, dependant upon exactly where the water is and how much there is, you could be just fine. In case the hot water heater is leaking water out of a pipe and there exists a little bit of water on the ground beside the water heater, it’s most likely the T&P valve. The temperature and pressure valve removes excess water vapor from the hot water heater, this steam becomes to water and will come out from the hot water heater by means of a pipe on the side of the tank. Whenever this is the situation, it’s absolutely natural and important for the heating unit to operate accurately. Don’t try to move the T&P valve and never block it. If you are concerned with the amount of water that is coming out from the pipe, call an expert! If perhaps the dripping water is originating from the bottom of the tank, it’s pretty much undoubtedly time to get a different water heater. When the water heater heats water the metal tank expands and contracts, and this activity might result in cracks and little fractures, that will eventually bring about leaks. When this occurs, it will be time to purchase a new system.

Rust

Around the pipes coming out of the water heater one can find pipe fittings that must be sealed tight to be able to keep the pipe in place and keep water from leaking out of the opening. In the event you are observing rust around such pipe fittings, water is seeping out of the hole. Even though it is not a major leak and will not likely bring about immediate damage to the hot water heater, in the event that the issue isn’t fixed, significant and pricey complications will eventually appear.

Burn Markings

If perhaps you are observing burn marks at the bottom of the water heater, there are 2 potential problems. Even so, each of them happen to be rather significant and each of them necessitate a professional. One problem might be with the venting. If the venting is clogged or was set up improperly, it may cause the exhaust gases to come back into the property. This is unsafe and can bring about sickness or fire if left alone for long. However, this might not mean you need to replace the water heater, which is a good thing. Another potential problem with burn marks might be that the flue pipes inside of the hot water heater are plugged. This could cause numerous hazardous problems and, sadly, the water heater will have to be replaced asap.

Yellowish Flame Color

Gas burning water heaters have a blue flame underneath the tank whenever it is running. But, in case you’re seeing that flame is an orange or yellow color, rather than blue, the burner isn’t functioning appropriately and is going to need to be looked at by a professional.

There are a lot of problems which can develop with gas burning water heaters, although together with consistent upkeep and annual examinations, you can prevent the need for an unexpected water heater repair in Corona that may possibly be pricey. Contact us today if you detect anything uncommon with your water heater!

Reasons for Water Heater Leaks

Posted by on Jun 4, 2015 in Gas Water Heater Repair Corona CA, Water Heater Repair Corona CA, Water Heater Replacement Corona CA | 0 comments

On account of the quantity of hot water the common homeowner makes use of every day, should there be a trouble in the plumbing system in having hot water, it can definitely lead to an interruption in one’s day-to-day living. Without having a hot bath, operating the dishwasher or cleaning white garments in the washing unit can have an adverse effect, Water Heater Repair Corona appreciates.

Sources of Corona Water Heater LeaksWater Heater Leaks Corona

As quickly as one feels there could be an issue with the amount or quality of hot water one needs to get the plumbing system examined. Should there be a hot water leakage it will swiftly bring about an increase in energy expenses and any water leakage can perhaps harm the residence.

Corrosion is the major source of a water heater leak. More recent water heaters are nicely developed and can last for a longer time as compared to anything it is changing, however they can certainly still produce deterioration also. If there are any indicators of rust on the outside of the water heater tank this is a preliminary indicator that there is a trouble starting. Nonetheless, the pipes that the water goes through can likewise wear away relying on the product of which they are constructed. Rusty pipes are far more hard to detect than rust on the water heater tank. It is essential to speak to a plumbing technician at the first website of any rust or deterioration.

If the water heater is improperly installed it can likewise trigger leakages too. A number of residents feel self-confident in setting up a water heater independently, however it is usually better to have Water Heater Repair Corona CA do the installation.
If you have any concerns or issues about the quality of your hot water do not think twice to offer us a call.

Repairing a Noisy Water Heater

Posted by on Mar 17, 2015 in Gas Water Heater Repair Corona CA, Water Heater Repair Corona CA | 0 comments

Water Heater Repair Corona CA is frequently being consulted to check out at water heater. Popping and knocking noises can be caused by problems with the water heater, but it’s likewise an aggravation. We are going to explore the most typical reason your water heater may possibly begin creating noise and what you can possibly do to calm it down! Prior to consulting a Corona professional, have a look at one of the most typical water heater issues and remedies.

The most likely reason a water heater creates noise

Again, if the sound is an indicator of an issue with the heater that issue is more than likely sediment build up. The sediment originates from the water in the storage tank. It is primarily composed of calcium and magnesium debris and is primarily an issue in residences which may have hard water.

If the sediment starts to accumulate at the bottom of the storage tank, it traps a little part of hot water below it. This triggers the hot water to boil as the tank operates. The sounds noticed are the bubbles popping through the sediment.

Furthermore, the sediment itself could be the reason for the sounds. The sediment sits at the bottom of the tank and can get burnt up creating unusual sounds. And sometimes, the sediment will get carried up to the top of the tank and breaks off creating sounds as it plunges back down, bumping the sides on its way.

How to avoid a water heater from creating noise

If sediment build-up is what’s creating the sounds, the heater should be examined. Water Heater Repair Corona can accomplish this and provide the tank a flush or advise a different remedy.

You can also stop sediment build-up by having expert routine maintenance carried out on the storage tank approximately annually. This technique involves flushing the tank of any sediment.

An additional excellent solution is to add a water softener in your Corona residence. Water softeners eliminate minerals from the water prior to it entering the water heater, dramatically minimizing sediment build up.

To learn more about other probable problems and remedies provide Hot Water Heater Repair Corona CA a phone call!

Water Heater Regulation Changes

Posted by on Dec 19, 2014 in Water Heater Repair Corona CA, Water Heater Replacement Corona CA | 0 comments

There are adjustments that will be taking place in April 2015 from the federal government on water heater rules.  The new requirements deal with the efficiency of all newly made water heaters.

What Will New Water Heater Standards Mean to Corona Homeowners?Water Heater Repair Corona

First of all the higher efficiency requirements will be a good factor obviously.  Nevertheless, it will at the same time increase the price of new water heaters.  The price increase will be due to the extra cost of producing the water heaters with more insulation in them.  A side effect of doing so, will increase the dimensions of the water heaters.  So if a property owner is upgrading the existing one, the new gas water heater storage tank will most likely occupy more room, which could possibly be an concern if the current area the storage tank is in is a close fit.

An additional modification is for 55 gallon water heaters or larger will need to switch to a PVC flue, for metal pipes won’t be permitted any longer. This will lead to an additional cost it the flue pipes have to be replaced when putting in a new water heater.

Water Heater Repair Corona CA is not indicating that one should go out before April 2015 and invest in a new water heater, but if ones existing water heater is more than ten years of age, it is getting near to the end of its life cycle. One can simply wait, however in so doing, the newly produced water heater will need to satisfy the new, more expensive specifications.  One is able to acquire currently available water heaters prior to the deadline day, and may consider to do this.

Stated by www.wtae.com …. an “older-model 40-gallon tank is estimated to cost homeowners $277 a year to operate. The new models are estimated to cost $263.”

This is what the Department of Energy has to state:
“Standards mandatory in 2015 will save approximately 3.3 quads of energy and result in approximately $63 billion in energy bill savings for products shipped from 2015-2044. The standard will avoid about 172.5 million metric tons of carbon dioxide emissions, equivalent to the annual greenhouse gas emissions of about 33.8 million automobiles.”

The following video by Rheem clarifies the new rules effectively:

Do not be reluctant to speak to us with any thoughts on a new water heater installation or replacement.  Water Heater Repair Corona is always here for you!

Leaking Corona Water Heater Pressure Relief Valve

Posted by on Dec 9, 2014 in Gas Water Heater Repair Corona CA, Water Heater Repair Corona CA | 0 comments

The pressure relief valve of a water heater has a vital job – ensuring the water heater tank does not blow up. So with that in mind, Water Heater Repair Corona CA wants to see to it house owners know the best ways to best look after it. They will leak when the valve breaks or when the water storage tank pressure gets greater then the relief point.Hot Water Heater Repair Corona CA

We advise that at least two times a year, house owners test to make sure the pressure relief valve, or T&P valve as we will call it, is working appropriately. All one needs to do is raise the manage for a couple of seconds and let go of it. It should snap back to its initial position. When it is raised, one could hear the noise of pressure being released from it, just like the noise of air coming out of a tire pump when being disconnected. Also, a little water may come out also. Both are normal. If the valve has not been tested for a number of years, it may stick at first also.

Nevertheless, if the handle does not snap back, or if it remains to leak some water, that is not typical. If it still leaks some, lift the handle a couple of more times to see if it does re-seat itself. You might want to wait a day or so it see if it re-seats itself prior to presuming it has to be changed.

Water Heater Repair Corona would like to manage any T&P valve replacements for you, so though water heaters are usually relatively maintenance free, there are some safety preventative measures one should bear in mind. With that here is an overview of a pressure relief valve replacement.

1. The gas to the water heater has to be shut off, or the breaker for an electric water heater.
2. The cold water cut-off valve has to be closed .
3. The valve below the T&P valve has to be opened to drain a little water in order to relieve some of the pressure in the storage tank.
4. The overflow pipe of the T&P valve needs to be removed. It might have to be cut off if it is soldered or securely glued.
5. The pressure relief valve needs to be unscrewed with a pipe wrench.
6. Wrap the new T&P valve with Teflon tape and screw it back in place. Make sure the overflow pipe opening is placed away from the storage tank.
7. Reattach the drain pipe, also making use of new Teflon tape.
8. Turn the water back on, and examine your work for any leakages.

The following video gives an introduction of this process:


Water Heater Winterizing

Posted by on Dec 1, 2014 in Water Heater Repair Corona CA, Water Heating Savings | 0 comments

We enjoy to share pointers on how to conserve on energy expenses at home here at Water Heater Repair Corona CA. Here are some of the best ways to get ones water heater ready for the winter.

An easy way to inspect ones water heater’s need for insulation is to put ones hand near to or on the outside of the storage tank. It is feels really warm, insulating the tank is advised. Throughout the winter this heat loss you just felt can accumulate. Alternatively in the summer season, if the water heater is located inside the home, and not in a garage, it can add heat to the room that you are attempting to cool. The heat you feel is obviously heat being lost. If it is not warm at all that is a great sign that the tank’s internal insulation is in respectable shape. New water heaters are being produced with a good quantity of internal insulation today. You can inspect the manufacture’s label to see what the R-value is. If it R-24 or higher, one ought to be in great shape without having to add an insulation blanket to the water heater.

Corona Water Heater Blankets

The treatment for this heat loss is with a water heater blanket or wrap. First check with your local energy company, for some have insulation kits at minimized expenses for property owners. A hot water heater blanket will be available in various sizes depending upon the gallon size of the storage tank. The higher the R-value, the more insulation it has. We would recommend getting at least an R-11.

The blankets are simple to install. They will come with insulation tape to finish the joints of the blanket. The shinny or vinyl side goes on the exterior.

For gas water heaters, wrap it all around, leaving the top flue unwrapped, and do not wrap around the controller on the bottom. Likewise, do not wrap the T&P valve lever, or the bottom of tank for that is where air gets in. For electric water heaters, the top can be wrapped for there is not an exhaust flue, however do not wrap the heating-element access panels.

Water heater blankets will last quite a very long time. You could even be able to use the very same one once more whenever the water heater is replaced, providing it’s the same size storage tank.

Water Heater Pipe Insulation

There are two kinds of pipe insulation that need to be made use of for a water heater. For pipes that are within 6 inches of the water heater exhaust flue, fiberglass insulation wrap ought to be made use of and must be connected with either high temperature aluminum tape or wire. Foam insulation sleeves can be utilized for all the pipes that are additionally away then 6 inches of the flue then.

The U.S. Department of Energy recommends that house owners insulate at least 6 feet of the pipe coming into and from the water heater. This will increase the temperature at the faucets 2 to 4 degrees and conserve cash on heating. We also recommend wrapping both the hot and cold water pipes too simply since every little bit helps.

Energy Savings from Corona Water Heater Insulation

Insulating an ineffective water heater can cut the cost of running that heater by 5 % to 10 %. Depending on the design, that can save anywhere from $5 to $20 each year, which means a water heater blanket can be paid for in 1 to 4 years. Adding insulation could decrease standby heat losses by 25 % – 45 % and conserve about 4 % – 9 % in water heating expenses.

What others round the web are saying:


Corona Water Heater Installation Costs

Posted by on Dec 1, 2014 in Water Heater Replacement Corona CA | 0 comments

The typical lifespan of a traditional tank-style natural gas water heater or electric water heater is about 8 to twelve years, so the prospect of needing to replace a water heater is an usual house improvement. Water Heater Repair Corona CA has discussed some of the elements that influence the installation expenses below.

The costs to install a new Corona hot water heater do variety in cost depending upon the business carrying out the installation, and depending on the type of water heater installed. For instance, energy-efficient tankless water heaters do cost more to install, though those expenses can be regained over the life of the device. Look into this tool from homewyse.com that will provide a quote on water heater setup expenses for the part of the country one lives in.

Water Heater Installation Cost Factors

Without seeing the area that ones water heater will be installed or replaced, it is hard to provide a particular idea of the cost. If it is a water heater replacement, and is being changed with a similar sized and style of heater, the setup costs will be very reasonable. If one is updating to a different kind of water heater, like from an electric to a gas or tankless unit, the setup expenses will certainly be higher because we will need to potentially install gas lines and hookups.

Another factor to consider is to make sure a replacement water heater will be up to code with what is needed now, not with what the code was 10 to 12 years earlier when the present water heater was set up. Also, there is the potential that the present water heater was not up to code when it was initially installed either! Which can be the case if a previous homeowner did the installation him or herself.

Because of the safety aspects involved with water heating systems, it is definitely best to have an expert plumbing company handle the setup. One, the majority of property owners will not have an idea of exactly what the code standards are. One danger element is that electric water heaters make use of 240 volts of electricity, which is very harmful to work with if not experienced in doing so. Water Heater Repair Corona spends a great deal of time taking care of improperly set up water heaters.

Another safety concern with not having a professional set up ones water heater is dealing with natural gas lines. This, too, can be dangerous, and a scenario where there can not be any leakages.

A final safety issue is with correctly venting the exhaust to ensure carbon monoxide gas leaves the house. Carbon monoxide gas poisoning takes place more often than many people think, and it is best to make certain one has a carbon monoxide gas detector in ones home too. According to the Centers for Disease Control, unintentional carbon monoxide poisoning causes 400 deaths each year and 20,000 visits to the emergency room.

Other factors to consider with setting up is ensuring it is plumbed correctly, there is enough clearance and guaranteeing drip pans are equipped, if needed.

Transite Asbestos Flues With Water Heaters

Posted by on Jun 13, 2014 in Water Heater Repair Corona CA | 0 comments

For those that live in an older house, right here is some info from a post we recently read and feel compelled to pass along to our Corona Water Heater Repair customers. Transite asbestos used to be used in venting gas home appliances, like water heaters, years back. Clearly, it is not used any longer, however in the following post, the Minnesota house inspector, Reuben Saltzman, found that within the vent flue was partly blocked from the asbestos flaking off into the flue.Water Heater Repair Corona

When inspecting one home in particular, Saltzman noticed “the top of the flue liner had fallen off the chimney, and the interior had collapsed in on itself, causing the water heater to backdraft. . . the interior had flaked apart and completely blocked the flue.  When the happens, the exhaust gases can’t escape, so they go back into the home.  There was heavy rust staining on top of the water heater, which is a telltale sign that the water heater backdrafts.  It doesn’t get much more obvious than that.” (read more…)

Saltzman recommends to repair this, do not continue to make use of a gas water heater on the same flue. Install either an electric one or a powervent water heater with a brand-new vent to the outside of the home. With a few of the older homes with this kind of flue installed, the flues are still in good shape. It could be ok to still use them if an examination shows they are in tack and not flaking apart. However, if not, definitely block them off and install an electric water heater or develop brand-new venting for a gas water heater.

There are some nice photos in this video of these asbestos flues:

Corona Water Heater Carbon Monoxide Poising Prevention

Posted by on Jun 5, 2014 in Water Heater Repair Corona CA, Water Heater Safety | 0 comments

We have actually recently seen a few news reports about carbon monoxide gas poising being linked back to a water heater as the source and so felt it essential to share some about that potential today. Yes, any fossil fuel burning appliance generates this fatal gas. Including hot water heaters. Nevertheless, with the proper setup of the water heater, together with routine upkeep, and a working carbon monoxide gas detector in the home, one can sleep safely.

Reasons for Carbon Monoxide PoisoningWater Heater Repair Corona CA

Carbon monoxide (CO) is a colorless, odor free gas that is a bi-product of the burning of a nonrenewable fuel source like wood, gasoline, coal, natural gas, or kerosene. Breathing in carbon monoxide gas fumes not only prevents oxygen from being used correctly by the body, however likewise causes damage to the central nervous system. Persons with existing health problems such as heart and lung condition are particularly vulnerable, as are infants, children, pregnant women, and the elderly.

Sources of Carbon Monoxide

The cold weather heating season is when a majority of carbon monoxide exposures take place due to using unvented supplemental heaters. An unvented supplemental heater is a type of space heater that utilizes indoor air for heating and vents the gases produced in the heating procedure out into the house. The majority of heaters of this type use kerosene or natural gas for fuel. While more recent designs have oxygen sensing units that shut off the heater when the oxygen level in the area falls below a particular level, older models do not have such safety features. Because of these safety issues, unvented space heaters have been prohibited in several states. Other sources of carbon monoxide gas are malfunctioning cooking devices, tobacco smoke, clogged chimneys, automobile exhaust, malfunctioning furnaces and gas clothes dryers, wood burning fireplaces, and a water heater.

Symptoms of Carbon Monoxide Poisoning

Here are the most typical symptoms of carbon monoxide poisoning however they are not constantly the same for every person who has actually been exposed and many times are similar to having food poisoning or the flu. A doctor can help in figuring out for sure.

headache
dizziness
weakness
nausea and vomiting
rapid heartbeat
seizures
cardiac arrest
loss of hearing
blurry vision
disorientation
loss of consciousness or coma
respiratory failure

Defense By Appropriate Gas Appliance Venting

The CDC offers the following information on preventing CO2 poisoning by ensuring ones appliances are vented correctly.

  • All gas appliances must be vented so that CO will not build up in your home, cabin, or camper.
  • Never burn anything in a stove or fireplace that isn’t vented.
  • Have your chimney checked or cleaned every year. Chimneys can be blocked by debris. This can cause CO to build up inside your home or cabin.
  • Never patch a vent pipe with tape, gum, or something else. This kind of patch can make CO build up in your home, cabin, or camper.
  • Horizontal vent pipes to fuel appliances should not be perfectly level. Indoor vent pipes should go up slightly as they go toward outdoors. This helps prevent CO or other gases from leaking if the joints or pipes aren’t fitted tightly.  (read more…)

It is definitely crucial to have CO2 detectors in the house. The Colorado State University Extension offers the following suggestions when picking a CO2 alarm.

  • Some inexpensive alarms consist of a card with a spot (spot detectors) that changes color in the presence of CO. The absence of an audible signal does not meet UL or IAS requirements for alarms, so these devices do not provide adequate warning of CO.
  • Some CO alarms have a sensor that must be replaced every year or so. The expense of this part should be a factor in purchase decisions.
  • Battery-operated alarms are portable and will function during a power failure, which is when emergency heating might be used. Batteries must be replaced, although some alarms have long-life batteries that will last up to five years.
  • Line-powered alarms (110 volt) require electrical outlets but do not need batteries. They will not function during a power failure. Some line-powered alarms have battery backups.
  • Some alarms have digital readouts indicating CO levels. Alarms with memories can help document and correct CO problems.  (read more…)

The following video gives some nice security suggestions for water heaters.

Not to frighten anybody, but we likewise wanted to include the following video of a water heater install that is not working properly and is dangerous.

Please see a doctor right away if you presume that you or a member of your household may have carbon monoxide poisoning. Water Heater Repair Corona CA can not stress enough the requirement of ensuring a professional plumbing repair business services and installs any water heater equipment in your house or business.

Replacing a Heating Element in a Corona Water Heater

Posted by on May 20, 2014 in Water Heater Repair Corona CA | 0 comments

If your water is not heating up properly and you think a defective heating element follow these seven steps on testing and replacing the element. Bad elements are common troubles specifically in older water heaters that have actually been in a few years. This can happen to a more recent heater as well. This is easily diagnosed and changed it could need a little perseverance.

Water Heater Repair Corona CA

Note: It is best to have a trained plumbing professional perform these steps. Water Heater Repair Corona CA just wanted to share the process for doing with our readers.

Devices needed: Ohm/Volt meter, heating element socket, [both of which can be purchased at a hardware shop], screw motorists Phillips and flat head.

Step one: Heating elements that go bad are quickly diagnosed by very first switching off the power to the heater then removing the access covers one at a time and examining each element separately. This will also deal with loud elements, ones that have calcium accumulation. The access covers are normally on the side of the tank one on top one on the bottom. Turn supply of water off and drain the tank unless one is experienced at changing elements with a complete tank.

Step Two: After getting rid of the top access cover, remove the insulation that lags it this ought to have been cut at the factory. The insulation will come right out. Then raise the plastic cover to expose the element. This will be on the bottom half of the cover.

Step 3: Remove one wire off the element and then put the meter on ohms and touch both contacts to see if it reads. If it does not read the element is most likely bad and requires changing. If it reads then proceed to check the next one. In electric water heaters there is a bottom and a top element.

Step Four: After determining where the bad element is eliminate both wires ensuring the power is off. Put the element socket on a cog and turn the element counter clockwise eliminating it. Some force could need to be put into this.

Step Four: Put the Gasket on the new element and hand tighten where the old element was and turn clockwise up until tight. Complete tightening up the element with the ratchet.

Step 5: Put the wires back on seeing to it they are snug.

Step 6: Fill the tank with water opening the hot water valves in your house to draw out air from the lines. Remove aerators on any faucets that are open and put them back on when finished. After the water is streaming in the sink or tub turn it off. Inspect for leakages after this is done.

Warning: Do not turn electrical power on prior to the tank is complete or another element could be damaged.

Step Seven: Turn the electricity back on put the insulation and covers back on. The warm water issue will be fixed.

Don’t hesitate to contact Water Heater Repair Corona with any questions you may have!

Resources:

How to Repair an Electric Water Heater

Electric Water Heater Element Tests

How to Test a Water Heater Element Video

 

Enhanced by Zemanta

What is the Perfect Corona Water Heater Temperature

Posted by on May 15, 2014 in Water Heater Repair Corona CA | 0 comments

There are varied views on exactly what is the very best temperature level at which to set ones water heater. Water Heater Repair Corona CA will be sharing a few of the various views with specific evidence from those sources in order for one to make his or her own decision on the topic.

First of all, the default setting most water heater makers have their tanks set at is 140 degrees. If you have actually never examined this already on your Corona Water Heater, that may be what it is set at. Also, it can be challenging to know for sure exactly what the temperature setting is because often times the temperature level dial does not have actual degrees written on it, simply warm, hot, really hot … something to that end. Some people feel they are pre-set at a high temperature so it feels excellent to have a lot of hot water – kind of like trying to create good brand name awareness in customers.

In terms of energy cost savings, by turning a water heater down from 140 to 120 degrees, it will conserve between 6 to 10 percent of total energy used. That equates to between $6 to $20 a year most of the time.

Let’s start off with the probably the most well known source, the U.S. Department of Energy. They suggest a setting of 120 degrees. The link to their website above provides a great deal of excellent information on the best ways to minimize ones hot water usage and expenses. It is definitely worth a read.

Now for the health dangers of too low of a temperature level setting. It can be shown that Legionella bacteria has the optimum growth range between 68 to 122 degrees. It is believed that 25 percent of all water heaters have differing levels of Legionella bacteria contamination.

Legionella bacteria triggers a form of pneumonia and is passed to humans when one inhales water contaminated with the bacteria – usually in showers, whirlpool baths and even air conditioning systems. Consuming the water is generally ok. It is a problem with having the germs get in ones lungs.

The Centers for Disease Control and Prevention estimates 8,000 to 18,000 Americans contract the disease every year. Five to 30 percent of the cases are fatal.

According to OSHA, “At low levels of contamination, the chance of getting Legionnaires’ disease from a water source is very slight. The problem arises when high concentrations of the organism grow in water systems. Water heaters, cooling towers, and warm, stagnant water can provide ideal conditions for the growth of the organism.”  (read more)

Cases to not have the water heater temperature level set at 140 degrees would be if there are children in the home or possibly with elderly people too. The risk of being burnt if the faucet was totally on hot water can be too great. Undoubtedly, anybody living in the home that is at risk of contracting Legionella Disease ought to have it set at 140.

Summary

So choose if there are any concerns of individuals burning themselves if the water temperature is too high. Also, be aware of any individual who has concerns of contracting Legionella Disease. Since the yearly cost savings of turning the temperature level down is only about $20 many the time with the average home’s hot water usage, it could be an excellent option to keep the temperature level above 120 degrees just for the wellness related benefits; nonetheless, Hot Water Heater Repair in Corona CA will let you make the call.

 

Water Heater Repair Corona CA

Explore more visuals like this one on the web’s largest information design community – Visually.

Enhanced by Zemanta

Corona Water Heater Safety

Posted by on May 9, 2014 in Water Heater Repair Corona CA | 0 comments

Water heaters are pretty easy on the face of it, and they’ve changed little in the past 50 years suggests Water Heater Repair Corona CA. Thanks to some vital improvements, they are certainly much better than they originally were, with longer life spans, greater efficiency, and more security functions that minimize the danger of injury and home damage.

All water heaters convert energy to heat, and then transfer that heat to water. They are connected to a cold water supply pipe and have at least one pipe for outgoing hot water that directs the heated water to taps and devices throughout the house.

Though there is a range of water heaters in the marketplace, consisting of electric, propane, tankless versions, as well as solar-powered models, the most usual in the United States is a holding tank fed by gas.

These include a steel tank with a heating element at the bottom and a flue running down the center of the tank to vent the carbon monoxide that is a byproduct of burning gas.

You’ll also see some sort of thermostat control on the body of the tank that enables one to shut down the gas and regulate the pilot light. These thermostats are equipped a temperature-sensing probe that immediately shuts down the gas if it identifies that the pilot light is out or fails to light.

The interior of the tank is bonded with vitreous glass to protect it from rusting. In spite of this safety sheath, there is always some percentage of steel exposed, caused by constraints in the coating process. That exposed steel is susceptible to rust. To safeguard the steel from rusting, the makers install sacrificial anode rods in the tanks, normally made from magnesium or aluminum. With the procedure of electrolysis, the anode rod corrodes, instead of the tank. The tank will rust if the anode rod is entirely consumed, unless one replaces it. This is the most typical reason for troubles with water heaters.

Preventive Maintenance and Corona Water Heater SafetyWater Heater Repair Corona CA

For the purposes of this information, we’re going to assume that water heater was properly installed, and that it passed the home assessment.

Here are some of the standard steps to preserving a water heater in proper shape.

Initially, eyeball it. Water heaters have lots of rust defense inside, however very little on the outside, so watch out for leakages. Also check for staining, flaking paint, or deterioration on the surface of the tank. External rust can trigger your tank to fail just as definitely as internal rust. Keep that in mind the outside shell might look fine on the outside, while consumed with rust on the inside. However, if absolutely nothing seems to be out of the norm, proceed to routine upkeep duties.

The two principle steps to maintaining a water heater are occasionally draining the tank to remove sediment, and checking the temperature and pressure release valve (T&P valve) to make sure that it is working properly.

When a water heater operates, sediment develops. That sediment is in fact calcium carbonate, a mineral present in the water, which is precipitated out by heating. It settles to the bottom of the storage tank, and can shorten the life of a water heater; minimize its effectiveness; block valves, lines and the recirculating pump; as well as offer a haven for anaerobic bacteria. How frequently one drains the tank depends primarily on the water quality where one lives. Locations that have very hard water require more frequent draining to keep sediment levels low. Typically, the frequency is anywhere from 6 months to 1 year.

The T&P valve is crucial for preventing explosions from over-pressure, as it immediately releases water at certain vital pressure levels and prevents the tank from exploding. Test this valve periodically to guarantee that it opens and closes appropriately, so it will not fail when you need it most.

NOTE: If you have actually never ever carried out these tasks before, it’s a great idea to work with a specialist to do it for you the very first time, and ask them to reveal you the best ways to do it yourself. While it’s not excessively complex, there are potential risks involved. The risks of doing it improperly are large in comparison to a very little service charge.

Lastly, install a carbon monoxide gas alarm system near your water heater. Carbon monoxide gas is odor free and colorless, however if your water heater does not vent effectively or begins to back draft, those fatal fumes can enter the residence and jeopardize the household.

If everything is working correctly, inspect the water temperature with a cooking thermometer to make certain it’s set to your households’ comfort level and to ensure security. If the water is too hot, it can heat or cause injury. Conversely, some individuals set their water temperature level low to attempt to be affordable. If the water isn’t really hot enough, it can harbor bacteria. A great intermediate setting for your water is above 120 degrees.

Learn more tips on our other blog articles too!

Corona Alternative Water Heating Ideas

Posted by on Apr 24, 2014 in Alternative Water Heating | 0 comments

Natural gas or electrical have been the norm for water heaters for quite a long time. Often however, alternative sources for heating water are preferred. A cabin in a rural place could be inaccessible to utilities, or a strategy to streamline a way of life requires a decrease in energy use. A number of means exist to provide hot water without gas or electrical power. Alternative methods might still use a basic water heater tank to store and disperse the warm water, or they could use a customized tank.

Water Heater Repair Corona’s Hot Water Heating Alternatives

Solar Power

Solar powered water heaters are fairly common appliances and are readily available in sizes ranging from little and portable for camping out in the woods to a full home-sized tank of water. A basic setup would include solar panels that heat a nonfreezing compound such as glycol, which is then pumped into a heat exchange device which moves the energy to the water. A backup propane heat source is usually made use of for the prolonged durations for when the sun is not offering sufficient.

Propane Gas

Propane gas brought in through tanks is the choice of energy for numerous rural areas. It supplies the energy for food preparation, and warming the house and water. A huge propane tank of 500 gallons might only require filling once a year. A propane water heater operates similar to a a gas heater supplying a home’s heat. Propane-alternative water heaters are readily available in the market today.

Wood Heat

Wood heat has been pushed into double-duty for warming water given that the innovation of a pail to hold water over a fire. For whole residence heating, along with more than enough warm water to even fill a spa or swimming pool, a devoted outdoor wood heater will do the job. It depends upon a system of insulated pipes for moving the water from the home to the heating system and back once again, with an insulated tank to hold the water up until required.

Creative Ideas

Creativity is the only limitation to heating water for the home. Geothermal units work by bringing heat up from below the soil level, which is then used to heat up the house and water. The U.S. Department of Energy has information on geothermal heat pumps here.

Some water heaters make the most of the heat generated by a continuous composting center where the temperature levels can reach 150 degrees Fahrenheit, while others utilize a windmill to charge a car battery which heats up the water. No matter the approach, and no matter exactly how far from civilization you wish to be, you never ever need to leave your long, hot baths behind.

Water Heater Repair Corona CA hopes these ideas are useful and we invite you to check out our homepage here.

Properly Sizing A Corona Water Heater

Posted by on Apr 24, 2014 in Water Heater Replacement Corona CA | 0 comments

Shopping around for a new water heater? For numerous people, it is not the most thrilling type of shopping to do, and for most people it may not be the simplest. A lot of water heater repair companies will definitely do a good job of making appropriate pointers for ones alternatives. If one is inclined to do some more in depth research oneself, below are some links that will be valuable.

Energy Expense Calculators
The U.S. Department of Energy has an energy cost calculator for electric and gas type water heaters on its website that is handy. It may seem a little overwhelming, however one should be able to complete the majority of the fields and get an approximation of just how much it will cost to run the water heater.

Water Heater SizingWater Heater Repair Corona CA
Many of the makers of water heaters have sizing calculators on their websites to identify what the suitable size heater will be thinking about the amount of water to be heated up at peak times of the day. Here are links to A.O. Smith and Bradford White.

Lots of gas providers have nice tools on their websites to determine costs also. Check with your local gas or electric company to see what they have published. Likewise, here is a cool device from the River Network in Portland, OR that will examine the energy and greenhouse gas emissions for any location in the United States.

Don’t be reluctant to contact Water Heater Repair Corona CA with any questions you may specifically have with figuring out the best size water heater for your Corona home.

Check out our Water Heater Replacement Corona CA page too…

How to Diagnose a Leaking Corona Water Heater

Posted by on Apr 11, 2014 in Gas Water Heater Repair Corona CA, Water Heater Repair Corona CA | 0 comments

Certainly not something that one wants to ignore or delay, is a leaking water heater. Even if it simply appears to be a little leak, let’s look after the issue in a timely way. Lots of times Water Heater Repair Corona CA has actually observed a minor leak suggests a larger problem at hand, or simply about to be at hand.Water Heater Repair Corona CA

Aside from the possible trouble the water heater itself might be having, one will desire to ensure the water leaking does not harm the floor or walls in the area of the leakage (not understanding where ones water heater is found). If that little leak becomes a significant leakage, the water damage might be costly.

Also, there are wellness issues with mold and mildew if the moist areas stay wet for an extended period of time. Some mold spores can be harmful and trigger wellness worries the EPA warns.

And, we have yet to see a water heater leakage disappear or repair itself.

Let’s Figure Out From Where the Leak is Coming
Condensation can form in overly wet weather, so a percentage of water under or by the storage tank may not be a leak. Other home appliances or a furnace drain line might be the offender even. Do an excellent investigation to be sure.

Take an appearance at the plumbing fittings and the top, sides and bottom of the water heater next. If they seem dry, that is an excellent sign and once more, could be originating from something else in the space. Not to be excessively evident, but search for directly above the water on the floor and see if an overhead pipe or something else could be the cause.

Right here’s a good test to do next if all looks alright. Dry the puddle of water. Put some dry paper towels down on top of where the puddle was and inspect them regularly. If they remain dry all is well. If not and there is absolutely nothing else in the area to trigger the water, then it looks like it is the water heater.

Once it is know that the heater is leaking, the initially thing to do is switch off the power. For electric heaters turn it off at the circuit breaker. For gas heaters, set the dial to off. If the leak is considerable, undoubtedly turn the water system off too.

Even if one is not feeling excessively comfortable fixing the leakage oneself, by assisting find the source of the leak will at first assist the water heater repair business that will aid.

Four Locations to Check for Leaks on the Water Heater

1. First inspect all-time low of the tank. There is a layer of insulation and the tank actually has 2 layers to it. An internal leak will generally be obvious from all-time low of the tank. If the water heater is aging, the within will eventually rust and weaken and will have to be changed.

2. The temperature and pressure relief valve, or called the T&P valve. It can be found on the side of the tank and has actually a pipe linked to it that runs down the side of the tank to the ground. It’s function is the release additional pressure in the water storage tank. If it is leaking, water might seep out of it by the manage or around where it connected to the tank. Water may be diminishing the pipe it is connected to. One can repair these leaks for the valves can break. However, it is good to be knowledgeable about this for the function of the valve is to ensure the tank does not blow up … so it’s kind of crucial to say the least.

One ought to a minimum of as soon as a year lift the pressure relief valve to see to it some water will come out and stop once again once the valve is launched. If water still streams or for some reason the valve will closed, it requires changed.

3. Next check the drain valve. It is simple enough to do. It is found on the side to all-time low of the tank. It needs to be closed all the method, undoubtedly. This is an easy repair if it is leaking. Lots of times these are made from plastic and can break. Similar to checking the pressure relief valve yearly, this must be opened and near to make sure it does not close up from lake of use.

4. Lastly, inspect the tightness of the cold and hot water connections to the water heater, located at the top. They might just should be tightened. If after tightening them they still show they are leaking, changing the connections generally will suffice.

In future posts Water Heater Repair Corona CA explain on how to deal with some of these repairs oneself. Let us know if you do not feel comfy managing any of this yourself.

Enhanced by Zemanta

Corona Tankless Water Heater Basics

Posted by on Mar 31, 2014 in Tankless Water Heater Repair Corona CA | 0 comments

Tankless Water Heater OverviewTankless Water Heater Repair Corona

Tankless water heaters hаvе growing in popularity fоr a whilе now. Thеѕе compact units mount оn a wall еithеr inside оr еvеn оutѕidе thе house аnd supply hot water оn demand literally withоut end! Thе Europeans hаvе bееn heating water with tankless heaters fоr years. Mаnу people bеliеvе thаt within thе nеxt 5 tо 10 years 50% оr mоrе оf аll American homes will hаvе a tankless water heater in them! Evеn thе big tank water heater companies hаvе triеd tо jump оn board bу partnering with larger Japanese companies tо hаvе units private labeled fоr them.

Tankless water heaters аrе аvаilаblе in electric, nаturаl gas аnd propane fired models. Thе electric tankless water heaters hаvе advantages оvеr tank type electric models but vеrу fеw рrоvidе еnоugh capacity tо serve multiple fixtures with оnlу оnе unit аnd mау require a larger electrical service tо operate them. Thiѕ hаѕ kерt mоѕt builders frоm uѕing thеm in nеw construction. Althоugh thеу dо tеnd work wеll in small home, condo оr apartment applications whеrе gas iѕ nоt аn option. Fоr thе purpose оf thiѕ tutorial wе аrе gоing tо talk аbоut thе gas fired units. Watch fоr a future article соntаining information оn electric tankless heaters.

Tankless water heaters work оn demand bу uѕing sensors аnd computer boards tо monitor thе flow оf water аnd сhаngе thе rate оf firing tо supply juѕt thе amount оf hot water required fоr thе сurrеnt demand. Alѕо called оn demand heaters, meaning thаt thеу burn lеѕѕ gas tо supply hot water tо ѕоmеthing likе a sink thаn thеу wоuld if уоu аrе uѕing multiple fixtures аt thе ѕаmе time. Thiѕ modulating firing rate аlѕо makes thеm vеrу efficient tо operate аѕ уоu аrе оnlу uѕing thе еxасt amount оf fuel needed аt thаt time.

A term thаt ѕhоuld bе avoided iѕ “instantaneous”. Tankless water heaters аrе nоt instantaneous. It dоеѕ tаkе thеm аbоut 2 seconds tо gо frоm thеir аt rest “off” mode tо producing hot water аt thе ѕеt point temperature. Thiѕ iѕ nоt a big issue however. Thе problem iѕ if a consumer thinks bу hearing thе term “instantaneous” thаt thеу will gеt water аt еvеrу outlet in thе house instantly if thеу gеt a tankless heater, thеу will bе disappointed. Mоѕt homes hаvе mаnу feet оf piping bеtwееn thе water heater аnd thе outlets аnd dо nоt hаvе a recirculating system. Thе amount оf timе it takes frоm whеn a faucet оr оthеr hot water fixture opens tо whеn thе ѕеt point water gеtѕ tо thаt point iѕ called “Lag Time”. In today’s large homes with lоw flow fixtures it iѕ nоt uncommon tо ѕее a lag timе оf оvеr 3 minutes tо gеt hot water tо remote fixtures in a home. Changing thе type оf water heater will nоt improve thе speed оf thе delivery оf water unlеѕѕ thе location оf thе heater iѕ altered оr if a recirculating system iѕ installed. Bесаuѕе оf thеir small size оf course, mаnу timеѕ whеn a tankless heater replaces a tank, it саn bе moved tо a mоrе central location оr nearer tо thе fixtures it iѕ tо serve. Thiѕ mау cut dоwn оn thе lag timе considerably.

Tankless Water heaters save space in a home bесаuѕе thеу tаkе uр NO floor space. Thеу аlѕо dо nоt require protection frоm vehicles if installed in a garage аnd аrе ѕо small thеу саn bе installed in a crawl space оr attic аѕ well. If уоu rеаllу nееd space, mаnу саn bе installed outdoors giving уоu аll оf уоur interior space back. Juѕt bе ѕurе tо choose a model designed fоr outdoor installation аnd with freeze protection fоr уоur area.

Energy Saving Features оf Tankless Water Heaters

Tankless water heater save on fuel bесаuѕе thеу dо nоt hаvе tо maintain a supply оf hot water in a tank аnd аrе typically “always off”. Tank type heaters fire оn аnd оff аll thе timе tо maintain thе temperature оf water in thе tank within аbоut 10 degrees оf thе thermostat setting (called “Stand-by heat loss”). Thiѕ аlѕо саn result in ѕоmе noticeable temperature difference. Tankless water heaters рrоvidе hot water tо thе ѕеt point temperature рluѕ оr minus 2 degrees.

Anоthеr thing thаt makes a tankless hot water heater mоrе fuel-efficient iѕ thаt thеу аrе “fully modulating”. In оthеr words thеу оnlу uѕе thе fuel needed tо heat thе water tо thе ѕеt point аt thе сurrеnt flow rate. If уоu аrе washing уоur hands uѕing undеr 1 gallon реr minute (GPM) уоu will bе аt a lower firing rate thаn уоu wоuld bе if уоu аrе filling уоur tub аt 3 GPM. Thiѕ works muсh likе уоur car. Whеn уоu аrе sitting ѕtill thе car iѕ idling. Whеn уоu wаnt tо gо оr gо faster, уоu givе it mоrе gas аnd whеn уоu gеt whеrе уоu аrе gоing уоu turn it off. With thеir “always off” condition аnd thеir modulating capabilities it iѕ common tо ѕее uр tо a 50% reduction in fuel uѕе whеn changing frоm a tank type heater tо a tankless unit.

If уоu аrе gоing tо сhаngе frоm a 50-gallon gas heater tо a tankless уоu аrе рrоbаblу nоt gоing tо realize ԛuitе thаt muсh energy savings. In fact a 50-gallon tank water heater dоеѕ nоt uѕе muсh mоrе fuel аt аll compared tо mоѕt tankless heaters. Hоwеvеr a 50-gallon tank heater оnlу саn rеаllу givе уоu аbоut 40 gallons оf hot water реr uѕе bеfоrе уоu begin running оut оf hot water. Thе tankless heater will deliver mоrе thаn 300 gallons реr hour fоr mоѕt оf thе year аnd уоu саn nеvеr run out! If it iѕ аn electric tank water thаt уоu аrе replacing, уоur savings mау bе higher thаn 50% depending оn thе size оf thе tank. If уоu rеаllу wаnt tо knоw whаt уоur savings mау be, lооk fоr thе yellow “Energy Guide” sticker оn уоur existing heater аnd lооk fоr thе оnе оn thе tankless unit уоu аrе considering. Thiѕ will givе уоu a good idea оf whаt tо expect. Of соurѕе уоur personal uѕе will effect thiѕ аѕ well. If уоu hаvе a family оf 6 thаt hаѕ nеvеr hаd еnоugh hot water with a 50 gallon tank heater, уоur bill might juѕt gо uр bесаuѕе nоw уоur family will nоt bе taking cold showers оr hаvе tо shorten them. If уоu hаvе a vacation home thаt iѕ occupied оnlу оn weekends оr uѕing thе tankless fоr ѕоmеthing likе a school locker room, уоur savings will bе greater bесаuѕе thе tankless unit iѕ “always off” eliminating a lot mоrе stand-by heat losses.

Pаrt оf thе decision making process is; Whаt dо уоu want? Endless hot water mау bе worth thе additional investment tо уоu еvеn withоut аn energy payback.

Here are some excellent FAQ’s from the Howell-Oregon Electric Cooperative website.

Locations fоr a Corona CA Tankless Water Heater

Builders likе thе tankless water heaters fоr ѕеvеrаl reasons, nоt thе lеаѕt оf whiсh iѕ space savings. Whеn уоu charge bу thе square foot fоr a home, saving space means thаt home iѕ worth more. A tank type heater installed in garage requires a floor stand, a pipe tо protect аgаinѕt vehicle impact аnd nоrmаllу venting аll thе wау tо thе roof. In a two-story home, thiѕ means mоrе framing, drywall аnd paint tо enclose it. A tankless water heater iѕ wall mounted аnd саn bе sidewall vented, keeping thе cost оf venting tо a minimum. It аlѕо dоеѕ nоt tаkе uр аnу оf thе garage floor space. Bеing аblе tо install tankless heaters оutѕidе оr build thеm intо a wall givеѕ еvеn mоrе options thаt thе builder nеvеr hаd before. Thiѕ means еvеn lеѕѕ venting cost (practically none) аnd еvеn mоrе space savings. Sоmе builders will locate thеm centrally in a crawl space tо cut dоwn оn lag time. Othеrѕ will locate thеm nеаr a master bath оr kitchen. Sоmе will install thеm in attics оr оutѕidе tо free uр mоrе space. Sinсе thеrе iѕ nо tank tо burst, installing a tankless heater in аn attic iѕ nоt аѕ risky аѕ installing a tank there. Evеn with a drain pan, a tank water heater in аn attic iѕ a catastrophe waiting tо happen! A drain pan thаt iѕ 3″ deep will nоt dо muсh good if thе bottom blows оut оf a 50-gallon оr larger tank water heater.

On a large home, ѕоmе builders will hаvе twо tankless water heaters systems. Onе will serve оnе раrt оf thе home аnd thе оthеr will serve thе rest. Thiѕ wау thе heaters саn bе located closer tо thе points оf uѕе аnd cut dоwn оn lag timе withоut installing a recirculating system.

Outdoor Installation оf a Tankless Water Heaters

Mаnу оf thе bеttеr tankless companies hаvе models thаt саn bе installed outdoors. Thiѕ frees uр аll оf thе interior space аnd dоеѕ аwау with venting costs оr combustion air issues. Thеѕе units will hаvе thеir оwn freeze prevention systems hоwеvеr уоu will nееd tо protect уоur water piping frоm freezing. Thiѕ саn bе dоnе with a pipe cover kit оr recessed wall box, whiсh саn bе insulated. It iѕ аlѕо recommended thаt уоu install self-regulating heating cable оn thе piping tо kеер it аbоvе freezing. Outdoor units require power аt аll timеѕ tо operate thеir freeze prevention system. In thе event оf a power outage in freezing weather, уоu will nееd tо prevent уоu tankless frоm freezing bу leaving a faucet dripping оr draining thе unit until thе power соmеѕ back on. A “back-up” power supply оr generator iѕ аlѕо аn option.

Check out our page for Tankless Water Heater Repair Corona CA too!

How to Turn Off a Water Heater in an Emergency

Posted by on Mar 31, 2014 in Water Heater Repair Corona CA | 0 comments

No person wants to think about this, but it is very important to understand the actions included in closing down ones water heater in case it is required in an emergency situation.

Emergency Corona CA Water Heater Shut Off Procedure

1. Switch Off The Gas or ElectricityWater Heater Repair Corona CA

Gas – Twist the dial on the top of the thermostat from the “on” to the “off” position. This will switch off the gas at the water heater. If you ever smell gas– exit the house and contact the gas company promptly.

Electricity – Find your breaker box and flip the breaker for your water heater or if your water heater has a disconnect switch close to the water heater simply turn off the switch to shut off power to the water heater.

2. Shut Off The Water Supply
Discover the cold side pipes link to the water heater and follow it back to the source or the wall. If you have an old style turn faucet handle – Twist the handle clockwise up until it stops. This need to turn of the water.
If you have a more recent lever design ball valve pull or push the the handle a quarter turn– this need to switch off the water.

Water Heater Drain.

3. Drain The Water Heater

Drain the water heater if necessary to stay clear of any damage by linking a garden hose to the bottom drain valve on the water heater. Run the other end of the hose to a lower location where hot or rusty water will not trigger damage (hot water can damage lawn and plants). Open the hot side faucet in the sink closest to the water heater– this will launch the vacuum seal and let the water drain from the water heater. Allow 10-30 minutes for the water heater to drain.

Check out more articles from Water Heater Repair Corona CA

Emergency Water Heater Repair in Corona CA

Posted by on Mar 31, 2014 in Water Heater Repair Corona CA | 0 comments

Does Your Water Heater Need a Repair Right Now?

Emergency plumbing and water heater repairs are generally needed at the most inconvenient times we understand at Water Heater Repair Corona CA. Sometimes there are not any indications that they are going to be in ones future either.

Many times, ones water heater is not providing as much hot water as is needed for the home. We can rapidly identify the source and let you proceed with your typical day-to-day routine. Our Corona neighbors have called upon us for a long time for their water heater repair needs. We also enjoy sharing as much information as we can in terms of ways to perform routine upkeep on ones own water heater to help keep working at peak efficiency. We regularly have details on our blog right here.

If you are thinking about remodeling or adding an addition or brand-new house we would love to be of support as well. Our water heater replacement services are exceptional as well as our capability to assist plan the installment of new water heater and plumbing systems in a new house or business.

Please contact us with any concerns. Enjoy our business overview video below too!