Water Heater Winterizing

Posted by on Dec 1, 2014 in Water Heater Repair Corona CA, Water Heating Savings

We enjoy to share pointers on how to conserve on energy expenses at home here at Water Heater Repair Corona CA. Here are some of the best ways to get ones water heater ready for the winter.

An easy way to inspect ones water heater’s need for insulation is to put ones hand near to or on the outside of the storage tank. It is feels really warm, insulating the tank is advised. Throughout the winter this heat loss you just felt can accumulate. Alternatively in the summer season, if the water heater is located inside the home, and not in a garage, it can add heat to the room that you are attempting to cool. The heat you feel is obviously heat being lost. If it is not warm at all that is a great sign that the tank’s internal insulation is in respectable shape. New water heaters are being produced with a good quantity of internal insulation today. You can inspect the manufacture’s label to see what the R-value is. If it R-24 or higher, one ought to be in great shape without having to add an insulation blanket to the water heater.

Corona Water Heater Blankets

The treatment for this heat loss is with a water heater blanket or wrap. First check with your local energy company, for some have insulation kits at minimized expenses for property owners. A hot water heater blanket will be available in various sizes depending upon the gallon size of the storage tank. The higher the R-value, the more insulation it has. We would recommend getting at least an R-11.

The blankets are simple to install. They will come with insulation tape to finish the joints of the blanket. The shinny or vinyl side goes on the exterior.

For gas water heaters, wrap it all around, leaving the top flue unwrapped, and do not wrap around the controller on the bottom. Likewise, do not wrap the T&P valve lever, or the bottom of tank for that is where air gets in. For electric water heaters, the top can be wrapped for there is not an exhaust flue, however do not wrap the heating-element access panels.

Water heater blankets will last quite a very long time. You could even be able to use the very same one once more whenever the water heater is replaced, providing it’s the same size storage tank.

Water Heater Pipe Insulation

There are two kinds of pipe insulation that need to be made use of for a water heater. For pipes that are within 6 inches of the water heater exhaust flue, fiberglass insulation wrap ought to be made use of and must be connected with either high temperature aluminum tape or wire. Foam insulation sleeves can be utilized for all the pipes that are additionally away then 6 inches of the flue then.

The U.S. Department of Energy recommends that house owners insulate at least 6 feet of the pipe coming into and from the water heater. This will increase the temperature at the faucets 2 to 4 degrees and conserve cash on heating. We also recommend wrapping both the hot and cold water pipes too simply since every little bit helps.

Energy Savings from Corona Water Heater Insulation

Insulating an ineffective water heater can cut the cost of running that heater by 5 % to 10 %. Depending on the design, that can save anywhere from $5 to $20 each year, which means a water heater blanket can be paid for in 1 to 4 years. Adding insulation could decrease standby heat losses by 25 % – 45 % and conserve about 4 % – 9 % in water heating expenses.

What others round the web are saying: